Solenoid Directional Control Valve,Hydraulic Valve,Solenoid Valve Raypoo Technology Co., Ltd. , http://www.szhydraulicvalves.com
NYP stainless steel inner ring high viscosity pump role and characteristics
NYP stainless steel high viscosity heat pump is an inner ring high viscosity pump, a type of internal rotor pump, especially suitable for conveying high viscosity and corrosive media. NYP series stainless steel high viscosity heat pump delivers high viscosity resin, polyurethane, polyurethane, polyethylene and Other similar high viscosity materials; especially suitable for conveying of high viscosity and consistency medium; pump head, pump housing and sealed chamber can be insulated Jacket. According to the actual needs of the need to select the location of insulation; jacket and pump body cast into one, the insulation effect is good, to avoid welding jacket produced a variety of problems; to be heated: through the hot steam, thermal oil and other heat medium access Jacket. (1) Working principle The drive gear (outer rotor) with internal teeth drives the inner rotor to rotate in the same direction in the fully enclosed pump body. The crescent plate of the pump body and the front cover separate the suction inlet and the discharge outlet. Negative pressure is formed at the suction port during rotation, the liquid is sucked in, the liquid is taken to the discharge port by the rotor, and the liquid is discharged under pressure to complete the liquid delivery. (2) Structure The series of high viscosity pump mainly consists of internal and external rotor, shaft, pump body, front cover, bracket, seal, bearing and so on. Seal mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal (special requirements, optional magnetic drive, zero leakage structure). When conveying the easily-crystallized material, a thermal insulation jacket can be designed on the front cover and the pump body, and steam is used to heat and melt when working. Pump can be equipped with safety valve, when the pump or piping system overpressure, the safety valve opens, the formation of internal reflux, to ensure system safety. Pump unit consists of pump, motor and base. There are two ways of transmission bridge and direct connection. NYP stainless steel inner ring high viscosity pump function and features are as follows: Petroleum, chemical, paint, grease, medicine, dyes, food and other industries â– chemical petrochemicals: petroleum, additives, polymers, lubricants, oils, waxes, asphalt, rosin â– Plastic Polyester: Polyester, Epoxy, Hardener, Isocyanate, Moderator, Resin â– Paint Coatings: Inks, Inks, Dyestuffs, Paints, Solvents, Inks, Rubber Solutions, Viscose, Latex â– Paper Pulp: Adhesives, black liquor, caustic soda â– Daily chemical industry: sulfonic acid, alkylbenzene, fatty alcohol, detergent, shaving cream, cream, shampoo, soap liquid â– Food industry: vegetable oil, lecithin, syrup, Yeast, protein, honey, glycerin, fragrance â– Chemical fiber industry: viscose, caustic soda, dyes â– complete sets of equipment: polyester equipment, chocolate equipment, lubricating oil recycling, printing machinery, asphalt machinery, asphalt vehicles