Hammock Carabiner,Hanging Seat Carabiner,Aluminum Hammock Carabiner Door Hardware Co., Ltd. , http://www.hardware-xy.com
Use of high-viscosity pump features
High viscosity pump especially suitable for high viscosity and consistency of the medium transport, widely used in a variety of fluid transport industry, especially for dealing with large viscosity changes, a wide range of fluid delivery. There are two kinds of ordinary cast iron and stainless steel. Pump head, pump housing, sealed chamber can be part of the insulation jacket, according to the actual needs of the need to select the location of insulation. Jacket and pump body cast into one, the insulation effect is good, to avoid welding jacket produced a variety of problems. To be heated: through the heat steam, HTF and other heat medium into the jacket chamber can be insulated. To be cooled: through a variety of cooling fluid, you can keep the pump constant temperature. Adjustable gap: the pump can be based on the needs of viscosity, without disassembling the pump to adjust the gear gap to achieve the pump at different viscosity of the process requirements, the overall bearing Box The second big advantage is that the gap adjustment can be done simply by turning the bearing housing. The operation is simple and requires no disassembly of any part of the pump. The outer rotor drives the inner rotor to rotate in the same direction with low wear and long service life. Applications: It is suitable for conveying pure and fluid with certain viscosity. It can be used for transporting oil products such as lubricating oil and crude oil. It can also be used to transport molasses, polyurethane , High-viscosity materials without particles and impurities such as black and white materials, rubber, asphalt, paint, adhesives, dyes, coatings, lubricants, polyols, foodstuffs and pharmaceuticals as well as PA PB PC PE PS HIPS ABS PP PET PVA and other high temperature, high viscosity polymer melt materials. The advantages of high viscosity pump (1) delivery of liquid smooth, pulsation, vibration, low noise. (2) has a strong self-priming performance. (3) The correct selection of parts materials, can transport a variety of corrosive media, the use of temperature can be 200 ℃. (4) the same internal and external rotor rotation, wear small, long service life. (5) pump speed and flow rate is a linear function, may be appropriate to change the pump to change the flow. (6) Especially suitable for conveying high consistency media. High viscosity pump medium temperature: -10 ℃ -200 ℃ (NYPO.78 and NYP2.3 applicable temperature -10 ℃ -80 ℃). High Viscosity Pump Medium Viscosity: 1.0cSt - 300,000cSt (NYPO.78 and NYP2.3 suitable viscosity of 1.0cSt-10,000cSt).