The closet is an indispensable piece of furniture for every family. There are various styles of wardrobes on the market. Consumers can choose according to their own preferences. However, because the size of the closet is relatively large, the wardrobe we bought must be assembled before use. So how to assemble the wardrobe ? Let's take a look with Xiaobian.

First, how to assemble the wardrobe - check the packaging

Whether it is express delivery or direct purchase, we must first check whether the outer packaging has been damaged. If the damage to the outer packaging is serious, then it is possible that the steel pipe inside was also damaged. At this time, we should reject it or not.

Second, how to assemble the wardrobe - check the accessories

Open the package and come up with instructions for comparison. See if the accessories are complete. The first thing to check is that if there are fewer parts, then the installation process will not be completed.

Third, how to assemble the wardrobe - the first installation of the bottom

First take out the bottom and high 4-way joints, followed by the middle of the connection with a short tube, install a 4-way joint on both sides, and then both sides according to their own position to tube. On one side, a long tube is installed, and on the other side, a short tube is installed. Then, the bottom cloth is attached to both sides of the tube, and a 3-way joint is installed on each of the four sides.

Fourth, how to assemble the wardrobe - sets of wardrobe cloth cover

After the bottom is installed, insert 6 short steel pipes, then align the holes in the surrounding, put the whole wardrobe cloth on it, and then install a layer of the same partition as the bottom, preferably on the 6 rigid pipes. .

Fifth, how to assemble the wardrobe - install the short side of the floor

First, insert the steel pipe next to it, and then install a separate cloth. Then connect the 4-way joint, then install two horizontal steel pipes, and then install the partition cloth until it reaches the top floor.

Sixth, how to assemble the wardrobe - install long-edge steel pipe

After the short side of the partition is installed, the next one is a vertical hanging area. Use a 3-way connector with 2 long tubes directly to the top.

Seven, how to assemble the wardrobe - top steel pipe installed

After both sides have been installed, then directly connected with a long steel pipe on it, followed by wardrobe hanging pipe can be installed with a hook-type connector.

Eight, how to assemble the wardrobe - sets of wardrobe cloth cover

When loading the whole cloth cover, pull the bottom to the top, which makes it easy to pull up on the top. After the top corner is mounted diagonally, the cloth cover can be pulled down so that the wardrobe is installed.

Editor's summary: The above is a description of how to assemble a wardrobe , hoping to help my friends. If you need to learn more about the wardrobe, you can always pay attention to us, and the following articles will be more exciting.

Laminated Grade Titanium Dioxide

Titanium Dioxide Tio2,Industrial Grade Titanium Dioxide ,Titanium Dioxide Rutile Tio2 588,Laminated Grade Titanium Dioxide

Yibin Tianyuan Group , https://www.ybtyco.com