(1) There are differences between the front and back sides of the splint. When picking, the plywood should have clear wood grain, smooth front surface, no roughness, and flatness. The best texture is the same, such as moire, wind pattern, rope pattern, landscape pattern and so on.

(2) Plywood should not have defects such as breakage, bumps, worms, rows of nail holes, dead knots, and burr groove marks.

(3) No degumming of plywood;

(4) Some plywood is made of two different lines of single-plate adhesive patch together, so it should be noted that when choosing, plywood joints should be tight, there is no uneven phenomenon. In particular, there should not be two different lines on a piece of plywood, otherwise it would hinder rational use, cause waste and affect the appearance of furniture.

(5) When selecting splints, care should be taken to choose splints that do not loosen. A 50cm wooden stick can be used to gently pound the plywood to the various parts. The sound is symmetrical and crisp and is basically the inner panel; if the “shell” sound is dumb, it may be due to degumming or bubbling. Intrinsic quality problems caused. This board can only be used as a lining board, or a top board, and cannot be used as a fabric.

(6) When choosing the splint, it is necessary to pay attention to the harmony between the color of the wood and the color of the furniture paint. Generally ash, beech splint paint light yellow, dark furniture can be, but Liuan splint has a depth of light, light-colored paint decoration is no problem, but the dark can only be made of ochre furniture, not light yellow Furniture, otherwise the furniture is dark in color. Although dark colors can be used to wash the painted yellowish furniture, the effect after treatment is not ideal. After several years of furniture use, the color will still be dark and deep.

(7) Grade stamps are generally available for reference on regular plywood board corners.

The grade marks of domestic plywood are: (first grade), (second grade), (third grade), (other grades).

Imported plywood is represented by “AA”, “BB”, “CC”, and “CC”—, two, three, and four. If the board is marked with the provinces "B", "C", and "D", it is plywood produced in Romania. If there is no imprint, it is likely to be bubbling or degumming. Please note this when selecting.

Furniture Brand Three Tree Lacquer Furniture Paint

LVL Intro.

Laminated Veneer Lumber (abbr. LVL) is an engineered wood product that uses multiple layers of thin wood veneer assembled with adhesives. Been peeled or sliced , the solid lumber`s made into thin veneers. Under the process of drying and glue-spreading, all veneers been layered up and hot pressed in order of parallel to the grain. Then the product`s been finished after sanding and cutting.

Usgae:

LVL is widely used as construction components, crossbeam, truck board, furniture, flooring, wood stud and packing.

Advantages and features:

1) Compared to the solid lumber, LVL is stronger, straighter, more uniform and stable. The bending and bonding strength are 3 times stronger than solid wood.

2) It can make the natural defects of solid lumber such as dead knots and scars split and crossed to enhance its strength and ensure the quality & form. LVL is the ideal raw material in place of the solid lumber.

3) It`s flexible to cut and make full use of the product. The max length we can produce is 12m and the thickness up to 300mm. The customers can choose the product as per their request.

4) It`s much less likely than conventional lumber to warp, twist, bow, or shrink due to its composite nature.

5) Same as other woods, LVL can be saw cutting, slicing, chiseling, mortising and nailing.

6) Free of fumigation.

Except LVL,Our company also have other products: LVL Wooden Scaffolding Plank, Scaffolding Board ,38mm Scaffolding Plank,42mm Scaffolding Plank.

LVL Scaffold Plank

Poplar LVL,LVL Wooden Scaffolding Plank,Scaffolding Board,38mm Scaffolding Plank,42mm Scaffolding Plank

Fushi Wood Group , http://www.fushiplywood.com