Vehicle Rescue Technique (Safety) Life Safety

News Related Keywords: No tags.

The safety of rescue workers is a top priority at every road accident scene or training.

Safety starts with personal protective equipment ( PPE ). The following items are listed as minimum personal protective equipment:

1. Complete fire / rescue equipment

2 , wearing a mask helmet

3 , eye protection equipment

4 , cut-proof gloves

5 , medical gloves (wearing cut-proof gloves inside)

6. Respiratory protection (dust masks) for glass management

7 , Reflective Jacket

key point:

1. After all-round investigations have been conducted and all risk factors have been identified and notified, rescue work can only be carried out.

2. The dynamic scenes and the problems affecting safety at the scene of the rescue are changing all the time. Therefore, continuous assessment is needed.

Use verbal warnings!

In the rescue process, any action may cause pressure on the injured or have a negative impact. Therefore, in order to take care of the injured, any action must be delivered in advance through oral warning.

For example, breaking / processing glass, cutting, expanding, supporting.

The use of verbal warnings means that everyone on the scene can be aware of what is happening early and are ready to take measures to protect the wounded or other field personnel when necessary.

Remember - site safety is everyone's responsibility

This article belongs to holmatro and edited by China Rescue Equipment Network.

Pc film is a Polycarbonate Film, is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastics.It has excellent physical and mechanical properties, especially excellent impact resistance, tensile strength, bending strength, high compressive strength; creep property is small, stable size; has good heat resistance and low temperature resistance, in a wide temperature range it has a stable mechanical properties, dimensional stability, electrical properties and resistance. Can be used in the 60 ~ 120 ° c long-term use; no significant melting point, in the 220-230 ℃ was molten state; due to the large molecular chain, resin melt viscosity, self-extinguishing material: Good performance in Light stability, good weather resistance; oil, acid, intolerant alkali, oxidizing acid and glue, ketones, soluble in chlorinated hydrocarbons and aromatic solvents.

Products are high-end imported raw materials, with excellent light transmission and weather resistance, resistance to stamp stronger, better ink adhesion, good insulation and flame retardant properties.

Polycarbonate Film

Polycarbonate Film,Black Polycarbonate Film,Pe Film For Polycarbonate Sheet

Daoming Optics & Chemical Co., Ltd , http://www.dmreflective.com