I believe that everyone is not unfamiliar with the switch socket , each family should install the switch socket , but how high these components should be to the ground, how to install the safest, but not everyone knows. We use the socket switch when the operation is very simple, but many people do not know what steps to install the socket switch , friends who want to learn just to look at the relevant information on the socket switch , give everyone about the switch socket 11 steps.

1, switch sockets can not be installed in the tile and waistline of the tile.

2, switch socket bottom box in the tile hole, the border can not be more than 2mm above the bottom box, can not be opened into a round hole. In order to ensure the installation of switches and sockets at a later date, the bottom edge of the box should be flush with the tiles as far as possible so that no longer a longer screw can be found during installation.

3, installed switch socket location can not have more than two tiles were destroyed, and try to make it installed in the middle of the tile.

4. The opening of the mounting faucet must be made into a round hole, it cannot be opened into a square hole, and it cannot be opened into a "U" type, and then a piece is added in the "U" type hole. The size of the opening cannot exceed 2mm of the pipe diameter. Above, and the outlet must also be flush with the tile.

5. When the socket is installed, the wall-mounted socket should not be less than 1.8 meters from the ground.

6. The concealed socket shall not be less than 0.3 meters above the ground. To prevent children from getting an electric shock, touching with a finger, or inserting a metal object into the power hole, be sure to use a safety socket with a safety cover.

7. The construction wiring requirements for single-phase two-eye sockets are as follows: when the holes are horizontally arranged, they are “zero-left-right-fire”, and when the holes are arranged vertically, they are “zero under fire”.

8. The wiring requirements for single-phase three-eye sockets are: the top grounding eye must be firmly connected with the grounding wire, solid, and connected, and must not be disconnected. The remaining two holes are connected according to the rules of “left zero right fire”. It is worth noting that the neutral line and the protective grounding line must not be miswired or integrated.

9. The refrigerator should use an independent, protective grounded three-eye socket. It is strictly forbidden to connect the grounding line to the gas pipeline to avoid serious fire accidents; in order to ensure the absolute safety of the family, the outlet of the range hood must also use the three-eye socket, and the protection of the grounding hole must not be taken lightly.

10, the bathroom is often used to take a shower shower, easy to wet, should not install ordinary type socket, should use waterproof switch to ensure personal safety.

11. When installing the switch, the concealed switch requires 1.2 meters to 1.4 meters from the ground and a horizontal distance of 150 mm to 200 mm from the door frame.

Xiaobian conclusion: The above is about the socket switch installation process needs to pay attention to matters, although a small home switch socket, but its function is very large, so its installation quality requirements are also very high, Xiaobian recommend you the most Fortunately, before installation, learn about some of the installation socket switch related knowledge, and then supervise the installation of the master job to ensure the quality of the outlet switch installation in the home.

Switch socket switch socket installation

Seal face is a typical and classical sealing form. Due to SiC, AL2O3 ceramic have superior hardness, anti-wear, anti-chemical, resistant high tempreture and pressure  and low friction with self-lubrication characteristics. It have been recognized a excellent material for seal face.

Ceramic seal face work as a sealing component through a fine finish treatment surface with greatest ideal flatness, very smooth working sides. Commonly, it used in some water pump, oil pump, centrifuge.

Ceramic Seal Faces

Ceramic Seal Faces,Ceramic Mechanical Seal Faces,Carbon Ceramic Seal Faces,High Polishing Ceramic Seal Faces

Jinghui Industry Ltd. , https://www.ceramictek.com