Now, in the home life, there is a very common phenomenon, that is, after the towel is used many times, it will become dry. If the towel is hard, how to do it ? When you wash your face, you will feel hard and feel very thorny. It is useless. How long the towel is discarded. In fact, there are a few very simple ways that can make the towel recover the softness of the past, so that it will not cause waste. It is a good way to solve the problem of how to do a towel when the towel is hard.

Reasons why towels harden

The reason why the towel is hardened is not that the towel has not been washed. The hardened towel is mainly composed of free calcium and magnesium ions in the water and soap. The resulting calcium and magnesium soap adheres to the towel, resulting in accumulation of residual dirt for a long time. One reason for hardening. The more we accumulate in this way, the more we feel the towel harden.

What to do if the towel is hard

1, pour rice water (first and second times) into the pot, put the towel into the boil, boil and cook for a while. After doing so, the towel will turn white, soften, become thicker than the original, and have a light, delicate smell.

2, put the towel in the washing liquid hot water, cook or hot for 5 minutes, and then hot wash it.

3, towels often wash and use soap, detergent or lye to boil for a few minutes at intervals, can prevent hard hair. When it is boiling, the towels should be completely immersed in water so as to avoid oxidation and reduce the softness when in contact with air.

4, When washing towels, place the towel in thick soap liquid, vinegar or alkaline water and boil it for a while. When cooking, you should make the soap soaked in the towel. Then rinse with warm water and warm water several times in order, and dry with water in a ventilated place. After drying, the towels will soften. It needs to be reminded that the towels should not be exposed to the sun for a long time, and it is generally better to dry them naturally in a ventilated place.

5, towel science disinfection method: The towel is first boiled with boiling water for about 10 minutes, and then washed with soap, and then fully washed with water, and finally folded into a microwave oven, heat 5 minutes.

6, the best way is to use vinegar essence, the vinegar essence in a 1:4 solution, the amount of water not more, over the towel on the line, soak for 5 minutes, then rinse and then rinse with clean water. Put alkali in the water, put the towel inside, keep cooking, and wash it, and the towel becomes fluffy.

The above is a description of what to do if the towel is hard. I hope to help you. For more information on the maintenance of towels, please continue to pay attention to information on this site.

Absorbent towel fiber towel bedroom small high-grade towel cotton towel

10W Mini Glue Gun Ptc Heating Features:

1. Versatile

2. Easy

3. Quick

4. Proective Nozzle Cover

5. Trigger Flow Control

6. Bonds instantly

7. High quality

8. High temperature or low temperature

Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.

Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.

General Safety Information:

1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;

2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;

3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;

4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;

If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;

If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.

5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;

6. Do not touch the nozzle or melted glue;

7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.

8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;

9. Keep out of reach of children and stocked it beyond any of Children palpable side;

10. Only used for melting glue stick, no other usage;

11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;

12. Close the power if the glue gun not in use after 15 minutes;

Important Caution:

1． Before use the glue gun, check if the plug cord into electrical outlet properly;

2． When glue gun in first use, the heating element will have small smoke, it is normal situation, but the smoke will disappeared after 10 minutes;

3． After power, not for a long time in standby mode(not longer for 20 minutes), when the suspension of use, unplug first.

4． Avoid to use the glue gun under very hot or very cold environments.

5． Better not work under direct cold wind blowing, it will reduce efficiency and loss power

6． When in continuous using, do not press the trigger with great pressure, and try to squeeze out the un-melted glue, it would damage the glue gun

7． Not applicable for bonding heavy objects or objects needed strong adhesive

8． The quality of glue stick will directly influence the glue gun function and sticking objects quality;

9． If the power cord is damaged, do not replace it by yourself, must ask for professionals to replace it.

10． This tools must b e placed in its position when not in use. And storage before the tools complete cooled.

11． Be careful when using any other electrical appliance with flammable material.

12． Not applicable for a long time in the same place.

13． Do not use an explosive gas atmospheres.

14． Note that heat may be the line of sigh, combustible materials.

15． Do not leave equipment unattended when switched on.

16． This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

17. Children should be supervised to ensure that they do not play with the appliance.

Using methods

1. Glue gun using voltage is 110-220V AC,50/60Hz;

2. Tip gun forward on stand and place a piece of cardboard under the nozzle

3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun

4. After power, wait for 5-10 minutes to allow glue to soften

Mini Glue Gun

10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun

Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com