As the stone will lose its original luster after a long time of use, why is it that some marbles are not satisfactory after the crystal surface treatment? This is affected by the different products used, construction techniques, etc. The effect of marble crystal surface treatment is not the same, then, how can we guarantee the effect of marble crystal surface treatment ? Next, take a look at Xiaobian! Six steps to help you easily handle marble crystals 1, in the choice of processing machinery, we must choose a sufficient weight of the crystal surface processing machinery, if you use the brush machine, its weight is not up to the requirements, the marble floor can not be refurbished. Moreover, the motor is not so good. In the process of processing the marble crystal surface, the motor is required to rotate for a long time. If it is other machines, the motor cannot withstand long-term rotation and is easily damaged. 2. On the previous day of hardening, it is necessary to maximize the cleaning of the part that will be crystal faced. It is better to thoroughly clean the marble floor and keep it dry so that it will not affect the treatment effect of the next day. . 3ã€After choosing a machine with good crystal surface, it is necessary to have an understanding of the indicators such as the power of the machine so that it can be selected to the right machine. In addition, it is generally to find skilled labor to operate, so that the ratio of various kinds of syrup is familiar. In order to achieve the best crystal surface effect. 4. Before using the treatment agent, just like before drinking milk, shake it a few times and stir the liquid inside uniformly. In the process of operation, be sure to prevent dust and sand from entering the crystal surface. workplace. 5. After the marble floor is cleaned, the first thing to do is to spray the crystal surface treatment agent on the stone floor by hand and use the crystal surface treatment machine to match the cotton pad and put the crystal surface over and over again. The treatment agent is smeared evenly on the ground until the crystal surface treatment agent dries and the operation can be stopped when the reflection and brightness can be seen. 6, then, is to add light agent, and then the same as the above steps, applied to the ground, this lightening agent plays a role in brightening the light, so that the ground is more shiny and beautiful. In the end, one more step is to continue spraying the crystal surface treatment agent again until it reaches the ground. This procedure is to ensure that after a period of crystal surface treatment, the marble can be maintained for a long time after being refurbished. The above is the related content of the marble crystal surface treatment, I hope to help you. For more knowledge about marble, please continue to pay attention to information on this site. Marble Marble Tiles Marble Cabinets
The Cross Flow Cooling Fan is mainly used for the cooling and increasing capacity of the dry type transformer and the cooling and cooling of the products such as electronic equipment, distribution cabinet, high and low, pressure switch cabinet and so on. The use of cross flow cooling fan can improve the output power 40-50% of dry-type transformers, thereby greatly improving the bearing capacity of dry-type transformers and prolonging the service life of dry-type transformers, which is the most economical and effective way adopted by domestic and foreign manufacturers. I produced the cross flow cooling fan air volume, low noise, further improve the pressure, reduce energy consumption, the shell is made of high quality Aluminum Alloy materials, compact structure, beautiful appearance, convenient installation, long service life, so as to cross flow cooling fan long time in a bad environment inferior smooth operation provides a reliable security.
Product show
Product Description
Use condition of cooling fan:
More Products
Factory Picture
If you have any questions, please contact with us directly.
Welcome you can visit our Factory.For inquiry,Please send mail directly to us.
Cross Flow Cooling Fan Cross Flow Cooling Fan,12V Cross Flow Cooling Fan,24V Cross Flow Cooling Fan,Dc Cross Flow Cooling Fan Shenzhen Fusheng Motor Co.,Ltd , http://www.fushengfan.com
1, the ambient temperature should be 75º C ≥ -40º C.
2. The industrial gases of the cooling fan are not allowed to have strong acids, strong bases and various solutions.
3, sand dust and other debris are not allowed to fall into the fan, so as to avoid the destruction of the fan and the fracture of the fan leaf.
Installation and maintenance of the cooling fan in this section:
1, before installation, should first check whether the damage, deformation, such as damage or deformation should be repaired and installed.
2, and then check the parts and screws are loose; between the blade and the cylinder whether a collision or shift, if encounter or shift should be adjusted before installation.
3. After the cooling fan is installed, the test machine should be carried out, and the fan should be used on line after the fan is running normally.
4. When the fan is reused for a long time, the wind turbine should be checked and tested without abnormal phenomenon, so it can be used online.
5. After the installation of the fan, the wiring should be sealed in order to prevent the connection leakage to cause the short circuit destroyed motor.
The marble crystal surface processing six steps to help you easily handle the marble crystal surface treatment