Shower shower
Corrosion-Resistance Alloy,mainly refers to ordinary stainless steel resists atmosphere and sea water corrosion such as 300 series stainless steel including 304,316L, 317L etc.; comparatively strong corrosion resistance material including austenitic stainless steel 904L, 254SMOand Dual phase steel 2205,2507 etc.; Corrosion Resistant Alloy containing Cu 20 alloy; In comparison to non-metal corrosion resistant materials, corrosion-Resistance Alloy main refers to iron alloy (resistance to corrosion); nickel alloy (Ni-Cr alloy, Ni-Cr-Mo alloy, Ni-Cu alloy and other active metal.
Corrosion-Resistance Alloy Corrosion-Resistance Alloy,Corrosion-Resistant Alloy Tube,Corrosion-Resistant Alloy Welding Wire,Corrosion-Resistant Nickel-Chromium Alloy Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com
The first is a dark shower. The concealed shower is located at the outlet of the wall, and it should be 2.1 meters away from the ground according to regulations. The shower switch should be 1.1 meters away from the ground. This position allows us to control the size and temperature of the water flow during use.
The second is a mounted shower. Now that the mounted showers are all of the kind that can be lifted and lowered, a lift bar is installed and we can adjust the height freely when using it. The position of the shower switch should be 1.1 meters from the floor. However, it should be noted that these heights are the actual installation heights. They are the heights between the shower switches and the floor tiles. If the feeling is not reasonable, they can be adjusted appropriately.
What should be paid attention to the installation height of showerhead? The data of these two installation heights is only the average data. In the actual installation process, it is combined with the actual situation. The shower switch hose should be left hot and right cold with a 15cm center spacing. In addition, we must also consider the water pressure of the tap water, and we must consider it in all aspects when we change the installation height. Under normal circumstances, we should control the water pressure to within 1.5 kg, so that the water pressure is most suitable for use in showers. If the water pressure exceeds the limit, the shower top bursts. When the water pressure is too low, the shower cannot be used normally. 
Shower installation height should pay attention to what
Shower installation height should pay attention to what? The living standards are getting higher and higher, and the requirements for clothing, food, housing and transportation are also constantly progressing, and the facilities for the family are also increasing. In our family environment, from the living room to the bedroom, the installation and materials in every corner are constantly advancing. In the decoration of the room, the bathroom is often the most worry-free, because it is small in size, simple equipment, but if there is not a good design, this small space will also bring unnecessary trouble to us. Showers, we must have equipment for each family, you can not underestimate its installation, design is not reasonable, the installation is not standardized, a direct impact on our use. Xiao Bian brings you together today to learn about the installation height of showers. After we install them, we can proceed with reasonable peace of mind. The shower installation height can generally be divided into two types: