SINOFUJI Mastic Tape Pad is especially suitable for the irregular shapes of overhead distribution clamps for power distribution pipes, outlet clamps and distribution network jumpers to achieve fast insulation and sealing on site and maintain long-term safety. SINOFUJI Mastic Tape Pad can be easily removed without any residue.
Testing Report of SINOFUJI Mastic Tape Pad Issued by
National Authorized Body
Self-Curing Insulation Protection Pad ,Waterproof Protection Pad, Anti Corrosion Mastic Tape Pad,Butyl Tape Mastic Pad ShenZhen FUJI Electric Material Co., Ltd , https://www.sinofuji.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Selection of low noise bearing Selection of low noise bearings
(1) Rolling bearings with low noise demand are in the standard bearings produced in China; some single row radial ball bearings and short cylindrical roller bearings have low noise types for power supply bearings. The ball bearings are from inner diameter φ2. 5mm to φ60mm. There are several types of suffixes with Zl, Z2 and Z3; there are three different low noise requirements; the eight types of roller bearings from N309 to N322 also have low noise specifications. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
These bearings are perfectly suited for use in other machines with low noise requirements; and they are inexpensive; they meet the requirements in terms of type and size; try to use these two types of low noise bearings.
(2) Select bearings with relatively small noise when the above two types of low-noise bearings cannot be used; bearings with relatively small noise can be selected. The detailed comparison is as follows:
1) The noise of the ball bearing is lower than that of the roller bearing; the (collision) noise of the bearing with less sliding is lower than that of the bearing with relatively sliding.
2) The noise of the solid cage bearing is relatively lower than that of the bearing using the stamping cage. The noise of the plastic cage bearing is lower than that of the above two cages, the number of balls is large; the outer ring is thick; the noise Also compared.
3) Bearings with high precision; especially the bearings with higher precision of the rolling body; the noise is relatively better than the noise of low-precision bearings.
4) The noise of small bearings is relatively small compared to the noise of large bearings.
Recommend to friends comments close window Bearing related knowledge The cause of wear failure of NTN bearing is analyzed by the method of hot-loading skf bearing of spheroidal roller bearing, such as public service, clearance, smooth oil groove, etc. Analysis of the characteristics of the outer spherical bearing of wind energy gearbox bearing
This article links to http://
Please indicate the bearing network http://
Previous:Analysis of the Causes of Damage to Imported Bearings Next: Common Terms and Definitions for Rolling Bearing Parts and Parts
Selection of low noise bearings
Source: China Bearing Network Time: 2018-05-15