The glassfiber Reinforcement Net is produced by fiberglass fabric with special surface treatments. It is a kind of necessary structure material in the EIFS (exterior insulation and finish system).
Glassfiber reinforcement mesh has high strength, good cohesion characteristics and can combine with EPS board firmly. Moreover, it can resist corrosion from building material such as cement and other alkaline materials, also prevent wall`s cracking, improve wall`s stress and impact resistance. Therefore, it is an ideal reinforcement material.
High Strength Fiberglass Reinforcement Net,Composite Fireproof Mesh,Fiberglass Netting,Fiberglass Compesite Net, Glassfiber reinforcement mesh Hebei TongChan Imp.&Exp.Co., Ltd. , https://www.tongchanmesh.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Detailed classification analysis of plastic bearings Detailed classification analysis of plastic bearings
1. Fine plastic bearings, fine plastic bearings; better than the fineness and public service of traditional plastic bearings. All the inner and outer rings are suitable for fine processing; the rolling body and the support frame; on the basis of the traditional advantages of plastic bearings; Used in fine and high-speed Anhui SKF bearing working conditions. Usually POM; PPS; or PEEK for inner and outer ring data; glass fiber reinforced nylon 66 (RPA66-25); or PEEK; tumbling for glass ball; stainless steel Ball or ceramic ball. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
2. Corrosion-resistant plastic bearings are aligned in different operating conditions. There are a variety of data solutions; even in the most stringent Inner Mongolia SKF bearings acid / alkali / salt / solvent / oil / gas / seawater corrosion can work freely; ensure the durability of the ambition Sex and expected life.
3. Anti-acid and alkali plastic bearings HDPE, PE, UHMWPE data have been proven to be used in relatively weak acid-base intercalation environments (30% CuCl2 solution and 30% NaOH solution test OK), PVDF and PTFE data can be used in strong acid and alkali environment In the meantime, PTFE can be used in all concentrated acid and concentrated alkali applications, including HF and fuming sulfuric acid nitric acid (98% or more).
4. High temperature resistant plastic bearings PVDF, PTFE (Teflon), PPS (polyphenylene sulfide), PEEK (polyetheretherketone), PI (polyetherimide) have proved to be the ambition to manufacture high temperature plastic bearings; It is used in a long-term temperature environment of 290 °C; the short-term temperature resistance is up to 350 °C in Xinjiang SKF bearings. It is the best one of all known engineering plastics.
5. Plastic bearing housing and plastic outer spherical bearing plastic bearing bearing is light and light; the device is simple; corrosion-resistant Guangxi SKF bearing corrosion; free of protection; together with common cast iron seat or stamping seat does not have the vibration and shock resistance function. Follow The continuous development of new materials is increasingly being widely used in engineering.
Recommend to friends comments close window Bearing related knowledge "TIMKEN imported bearing protection and protection" Detailed explanation of the FAG bearing based on the service life and reliability requirements of the selection of the method of bearing clearance measurement of the impact of the use of INA bearing life analysis of the bearing professor brief description of the use of smooth grease
This article links to http://
Please indicate the bearing network http://
Previous: φ2100Χ3000 overflow ball mill operation, protection and maintenance procedures Next: Inch tapered roller bearings LM48548/10
Detailed classification analysis of plastic bearings
Source: China Bearing Network Time: 2018-05-27