Two fires in public houses to consider safety and fire prevention

Case 1:

1 dead and 2 injured in a fire in a self-built house in Tongxiang City, Zhejiang Province

At 11:09 on the 20th, a fire broke out in a residential building at No. 956 Hexi Community, Wenhua Community, Fengming Street, Tongxiang City, Jiaxing, Zhejiang Province. There were 6 vehicles and 27 vehicles in the South of the Tongxiang Fire Squadron and the Tongxiang Fire Squadron, and 5 vehicles in the Fengming Full-time Fire Brigade. People rushed to the scene and immediately began search and rescue and fire fighting operations. Three people were rescued during the search and rescue operation. The three were subsequently taken to the hospital for rescue. The fire was completely extinguished at 1210 hours. One person was killed in the accident and two others were injured in varying degrees.

Case 2:

One-and-a-half-injured one-hundred-year-old house in Zhoushan, Zhejiang, caused fire

At 3:05 a.m. on February 18, a fire broke out in a residential building at No. 40, Lane 10, Bingang Road, Shenjiamen. More than 50 officers and soldiers of Zhoushan fire extinguished the fire after nearly three hours of hard work. Rescue workers have evacuated more than 70 people from the fire and adjacent buildings, grabbed more than a dozen gas cylinders, and successfully saved the shops in front of the shops and surrounding houses.

It is understood that the fire building is a two-story brick-and-mortar residential building, with a construction area of ​​about 200 square meters, all over the fire, the roof collapsed. The building was built in the period of the Republic of China. It has a history of more than 100 years. The houses are mainly used for renting. There are 7 households and 17 people renting houses together. The rented houses are mainly foreign residents. One person died in the fire and two tenants were injured.

Ten points for fire prevention in autumn and winter season

One of the matters: Do not unwittingly disturb the wire, use a safe fuse, and do not use copper wire instead of a fuse.

Item 2: Maintain a safe distance of at least 0.5 meters between incandescent light bulbs, fluorescent lamps and flammable materials; do not use flammable materials such as cloth and paper for lampshades; heat-resistant insulating sheaths should be provided for wires near lamps with poor heat dissipation conditions. protection.

Item 3: Ensure that the electric appliance has sufficient heat dissipation conditions. Do not place any combustible items such as curtains, clothing, books, etc. around the TV, air conditioner, computer, heater, or refrigerator.

Item 4: Do not use electric heaters, hair dryers, induction cookers and other appliances in the absence of people, and pay attention to people to cut off the power supply.

Item 5: Regularly check the electrical circuit for damage, short circuit, and poor contact. If any problems are found, repair it in time.

Item 6: The use of liquefied gas, coal stoves and other open fire stoves should have a separate place to maintain good ventilation, and maintain a distance of at least one meter with the combustibles.

Matters 7: Develop good fire habits. Don't randomly throw away cigarette butts and matchsticks.

Item 8: Do not use high-power electrical appliances, and do not use several electrical appliances with power exceeding 1000 watts at the same time to avoid overload caused by line overload.

Item 9: When gas leaks are found, quickly close the gas source valve, open the doors and windows for ventilation, do not touch the electrical switch and use an open flame, and promptly notify the professional maintenance department to deal with it.

Item 10: When household appliances or lines catch fire, they must first cut off the power supply and then use dry powder or gas fire extinguishers to extinguish the fire. Do not directly splash water to prevent electric shock or electric explosion.

This site solemnly declares: This article is the original article for the China Labor Insurance Network. If you need to reprint please indicate the source.

These beads are coated with a special coating during the manufacture of the glass beads. In the rainy and foggy weather, the moisture can not easily adhere on the surface of glass beads, so the effection on reflectivity caused by bad weather will be reduced. The granulometry of this type glass beads is the same as non-coated glass beads.

The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.

Moisture-Proof Glass Beads

Moisture-Proof Glass Beads

Moisture Proof Glass Beads,Moisture Proof Glass Beads Road Marking,Reflective Moisture Proof Glass Beads,Moisture Proof Solid Glass Beads

CHIYE GLASS BEAD (HEBEI) CO., LTD , https://www.chiyeglassbeads.com