Nowadays, the paint on the market is constantly improving in terms of functions. Due to a lot of different functionalities, it is favored by many consumers. The floor coating is a ground decoration material made of epoxy resin as the main agent, and added with pigments, solvents, and auxiliary curing agents. Here we have to explain about the construction process and horizon horizon paint paint construction should pay attention to what's relevant content.

Leveling paint construction process

1. For ordinary people, they generally do not understand the construction process of the leveling paint, but it is very important for the staff in this area. The first step is to do basic treatment on the ground. Grinding the ground with a grinder and cleaning the dust is not a new project that has just been completed for the purpose of construction. In order to construct the floor paint, it must be allowed to dry for a month or so. For example, the site that has just been renovated will surely have a lot of debris on the ground. Even masonry, including the workshops that have been on hold for a long time, is bound to have a lot of dust. These must be mutually beneficial and clean. Provide a clean environment for the construction of floor paint. Only in this way can the floor paint fully adhere to the surface.

2, in the next construction is the need to scratch the epoxy primer, then this one construction method is also, in order to be able to increase the adhesion of the paint layer, because the uneven surface of the floor surface will affect the floor paint Construction effect. After the floor surface is clean, it is also necessary to apply an epoxy sealer to seal the gap, and then level the putty layer twice to better fill the floor. In order to make it have stronger characteristics, it is necessary to add a certain amount of thinner to increase its anti-permeability. After the material is stirred uniformly, it shall be coated twice with a rollernapping evenly to complete the wear-resistant topcoat. It will be put into use after one week.

What should pay attention to the construction of floor paint

1. During the operation of spraying the ground lacquer construction, we must note some problems that are more easily encountered in various aspects, such as the involvement of color, texture, scratches, and poor hiding power. The base surface should be flat, clean, dry, and firm. The new concrete floor or new cement floor and the cement repaired floor should be maintained for a minimum of 30 days. Water and water repellent treatment should be provided to the ground and different occasions that may be exposed to moisture.

2. If the ground environment is not very good at the construction site, it is better to increase the number of coats of ground paint, which is usually two-component epoxy sealer, and the number of coats is 1- 2 roads. Generally, the next day after the primer is applied, the epoxy coating is applied. After the hard coating, it is ground and polished. It is necessary to apply two or more passes until the surface roughness meets the design requirements. Floor paint shall be combined in strict accordance with the specification, or it shall be fully stirred and evenly mixed. If necessary, thinner may be added to adjust the viscosity. After being filtered, it may be painted.

3. We should not only pay attention to the above-mentioned attention to the construction of the floor lacquer, but also have the concern that the floor lacquer after the construction is completed. We need to do some maintenance for it. The walking time is not less than 24 hours. The opening time of heavy objects is 7 days. During spraying, it must be noted that the construction site must be properly ventilated. It is forbidden to use pyrotechnics adjacent to the construction site and take all other necessary safety and firefighting measures in accordance with the site conditions.

The relevant content on the construction process of the lacquer lacquer and the attention paid to the construction of the lacquer lacquer is introduced here. I hope this helps everyone. If you still don't understand where you can pay attention to more news, if you want to learn more about this news, please continue to pay attention to our website.

PVC coated fibreglass yarn, resists dents. Simple installation with good visibility.
PVC coated polyester yarn, unique knit provides a barrier for pollen and dust. 87% blockage of pollen.
PVC coated polyester yarn, heavyweight material withstands damage from pets and children. Six times tougher than fibreglass screening.
UV stabilised high density polyethylene yarn resistant to UV and corrosion. Four times tougher than fibreglass screening.
Heavy duty alloy, powder coated mesh resists harsh weather conditions. Ember Defender bushfire protection. Available by the metre.
Attaches flyscreen inside window frames. Clear appearance suitable for all frame colours. Suitable for various flyscreens. Bulk pack suitable for the trade.

Insect Screen And Accessories

Insect Screen, Insect Screen Accessories,Insect Screen,PVC Spline,plastic buton, plastic part, spare parts

Hebei Charlotte Enterprise Co., Ltd. , https://www.cnscreening.com