During the production and use process, the insulation resistance of the motor is reduced, which affects the normal use and operation safety of the motor. Motorized Vertical Sheer Fabric Shades Opaque Folds Vertical Shades,Motorized Faux Vertical Shades,Single Track Vertical Shades,Filtered Light Vertical Shades Shenzhen Yuaneng Industrial Co.,Ltd , https://www.bi-colour.com
During the production and use process, the insulation resistance of the motor is reduced, which affects the normal use and operation safety of the motor. The drop in insulation resistance of the motor is mainly caused by the following reasons:
1. Due to the human factors such as the selection and storage of the motor, improper maintenance and other environmental factors, the moisture enters the inside of the motor to form condensation.
2, due to the direct injection of water into the motor.
This paper mainly analyzes the maintenance method of small asynchronous motor water ingress and damp.
The small asynchronous motor is easy to disassemble and disassemble, and can be dried or disassembled in situ according to the site environment. It can also be processed in the inspection room. Generally, the motor is dried in the following two ways:
1. The general small low-voltage asynchronous motor is suitable for external heating and drying of the motor.
1 operation is relatively simple;
2 The principle is to dry the motor by radiation, convection and conduction of the external heat source during drying.
2. Drying with a light bulb (or infrared bulb), an oven, and drying with a hot air blower;
1 When using a bulb or iodine-tungsten lamp, do not get too close to the coil to prevent the coil from being baked;
2 Safety luminaires must be used, and the temperature should not exceed 100 °C when using the oven.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Maintenance method for small asynchronous motor into water and damp