Our Polyurethane Ceiling Roses have Various designs with flower or without flower, You may decorate one piece on the ceiling, or use Polyurethane Ceiling Rose as a decorative ornament for the ceiling or wall, Polyurethane Ceiling Rose breaks up large ceiling surfaces and light up your room. you may paint Polyurethane Ceiling Rose to combine your funiture color, this series goods give you complete new decorative room!
Our PU Ceiling Medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density polyurethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, plastic type medallions. Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. PU Ceiling Medallions are light weight for easy installation. They are fully primed and ready for your paint.
Advantages of Ceiling Rose, Ceiling Domes, Ceiling Tiles , Ceiling Rims ,PU Ceiling Rose,PU Ceiling Medallion :
1. Elegant European style.
8. Labor efficient
Our Service: Polyurethane Ceiling Roses Ceiling Roses,Ceiling Domes,Ceiling Tiles,Foam Ceiling Rim,PU Ceiling Roses,PU Ceiling Medallions,Arc Mouldings,Curved Moldings,Oval Ceiling Medallions Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com
When the steel pipe is lifted as a whole, the steel pipe section and the section are connected or welded on the ground. After the ground connection is completed, use the crane or the pole to lift the entire pole up and the top surface of the foundation and fix it on the foundation. In the course of the overall erection of the steel pipe rod, the shaft is subjected to a large bending moment because of the large length of the shaft. For the purpose of construction safety and protection of the rod body, the hoisting process should be checked before hoisting. (cement fence)
2. Many models to choose from.
3. Suitable for both DIY and construction projects.
4. Superior to Gypsum moldings.
5. Light weight, easy to transport and install.
6. Elaborate patterns.
7. Better flexibility.
1.Factory direct sale with excellent quality, reasonable price and first-class service.
2.Timely delivery to every corner of the world.
3.Strong supply capacity, high-tech skills and advanced equipment can surely meet customers` requirement.
4.Launching new designs for each category every year.
5.Exquisite workmanship. All products 100% inspected.
6.Preferential freight by Famous shipping company.
7.Excellent after-sales service.
How to correctly choose the power steel rod construction hanging point?
It is very important to select the proper lifting point for the construction of power steel poles, because cement rods are widely used in low-voltage lines. Because of its low cost and low steel consumption, power steel rods save raw materials; at the same time, The small footprint and the saving of land area during construction have been widely promoted in 220kV lines in recent years. The construction of electric steel rods has its own shortcomings in comparison with the iron towers. The rods are long and difficult to lift. Steel rods stand up easily to deform or even break. Therefore, it is very important to select the proper lifting point for the lifting of steel pipe rods during construction. Larger lengths of electric steel rods are divided into subsection hoisting and integral hoisting. In the case of sub-lifting, the tie point is located at the top of each section of the steel pipe. Due to the shorter section length, the bending moment of the steel pipe shaft is smaller when lifting, and the bending moment that the steel pipe bar itself can withstand can meet the hoisting requirements. Calculations. After the steel pipe is lifted, it is connected or welded to the assembled section in the air until the base bar is fully completed.