Check Valve,Control Check Valve,Flanged Check Valve,Threaded Valve Zhejiang Philic Fluid Control Co.,LTD , https://www.philicflow.comWhen processing the workpiece φ16.5mm hole shown in Figure 1, the factory uses the bearing to press the workpiece and the V-shaped iron positioning method on the M2110 grinding machine. The effect is better. The base 12 (Fig. 2) is fixed on the grinding table 11 by screws. The dovetail slot is provided with a head frame 1 and two adjustable plates 5 with a V-shaped iron 4, and the V-shaped iron has an angle of 90° on the working plane. Carbide blocks are included. The workpiece is centered on the finished foreign surface on the four cemented carbide blocks of the V-shaped iron.
V-shaped iron and bearing compression grinding fixture