I want to know the pad set in the picture >>

1, the toilet seat bacteria to focus on cleaning

The survey found that 32% of the toilets had dysentery bacillus, and one species of dysentery bacteria called “Song Nei” survived on the toilet seat for up to 17 days; another experimental report also pointed out that there will be 100 million gray matter in the spinal cord. The inflammatory virus was thrown into the toilet and there were 3,000 viruses that had splashed on the seat. At the same time, many people like to put a flannel washer on the toilet in winter so that they are more likely to absorb, trap, and discharge pollutants, making it more likely to spread diseases.

The place where the pollution is so serious is the most “intimate” contact with people's skin. Therefore, it is important to clean it and apply a diluted household disinfectant every one or two days. As for the gasket made of cloth, it is better not to use it. If it must be used, it should be cleaned and disinfected frequently. If possible, consider changing to a toilet with antibacterial function and splash-proof design.

2, flush

If the toilet lid is opened when the water is flushed, the instantaneous cyclone inside the toilet can bring germs or microorganisms up to a height of 6 meters in air, and can be suspended in the air for several hours, and then fall on walls and objects. In most families, toilets, toilets, and showers are all in the bathroom. Toothbrushes, mugs, towels, etc., are in the same room as toilets and are naturally susceptible to bacterial contamination. Therefore, you should develop the habit of covering the toilet lid when flushing.

Toilet easily stained with urine stains, feces and other contaminants, if you still find traces of residue after flushing, be sure to use a toilet brush in time to clean, or easy to form macular stains, but also breed mold and bacteria. In addition to the mouth of the pipeline, the inner edge of the toilet at the outlet of the toilet bowl and the outside of the base are places where filth is filth. When cleaning, the toilet seat must be lifted off, and the interior of the toilet should be sprayed with a toilet agent. After a few minutes, the toilet brush should be used to thoroughly scrub it again. It is better to use a fine brush to better clean the inner edge of the toilet and the depth of the pipe mouth. Then scrub the base and other gaps.

3, try not to set waste paper basket

Normally, it is also possible to place a gradually-dissolving automatic toilet agent or a wall-mounted sterilizer in the water tank, and the effect of cleaning, descaling, and sterilization can be achieved through each flush.

Most families will set up a wastebasket beside the toilet to store used toilet paper, but this will cause bacteria to spread with the air, because few people can clean it at any time, at least for a day or two, and the longer it will take The more bacteria that grow.

Toilet paper should be thrown into the toilet to flush away. As long as it is not too thick and too tough, toilet paper can generally soften quickly in water, so there is no need to worry about clogging. When you need it, it is okay to have a hygienic bag. There is no need to set up a waste basket. If you must use it, you must also choose to use a lid to prevent bacteria from spreading and deal with used toilet paper in time.

4, toilet brush to keep clean and dry

A toilet brush is a hero that keeps the toilet clean. However, if it is not cleaned and dried, it can become a source of pollution. After each brushing of the dirt, the brush will inevitably be contaminated with dirt. It is best to flush it with water, rinse it, drain the water, spray the disinfectant, or soak it regularly with a disinfectant solution and put it in a suitable place. . It is advisable to suspend the toilet brush. Do not place it in a corner or in an airtight container.

Xiao Bian concludes: The purchase of good quality household products is a must, but any product is inseparable from maintenance, and maintenance of the home is also a key lesson.

Toilet toilet sanitaryware maintenance home bathroom design bathroom picture home picture

EN1423&1424 Glass Beads, blyglassbeads has classified based on the refraction, reflection ,roundness and the ratio of the beads . the micro glass beads particle is used in the thermolastic road marking reflection paint , excellent for road marking , specially to improve the visiblility at night. 

Road marking glass beads,1.5 Index Glass Beads, there are  BS6088 Class A, BS6088 Class B, AASHO M247 Beads, EN1423/1424 glass beads, NBR6831, Roadway Safety Glass beads, glass microspheres,Reflective glass beads, these beads are especially made for use in road marking paints and thermoplastics to provide excellent night retro-reflective.

EN1423/1424 standard glass beads are high quality glass micro spheres resulting from the specialized processing of selected glass cullet. EN1423/1424 standard glass beads is a major factor in increasing road safety in a very economical way. Thanks to the beads`retroreflective action at night, a vehicle`s headlight beam is returned to the driver`s eyes, which results in a [light-up" effect of the striping. The micro spheres not only multiply the visibility of road markings at night, but also increase the striping`s durability in general. EN1423/1424 standard glass beads are used as drop-on agent and as premix beads for road marking materials.

EN1423&1424 Glass Beads

EN1423&1424 Glass Beads,EN1423&1424 Micro Glass Beads,EN1423&1424 Road Marking Glass Bead,high visibility EN1423&1424 Glass Beads

YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com