Plate material paving works should meet the following requirements: 1. All kinds of materials are laid on the ground and should be carried out after the interior ceiling and wall decoration works are basically completed. 2. When laying wooden floors and parquet floor coverings, the rooms should be dry to avoid construction under humid conditions. 3. The surface layer shall be laid with cement mortar. The base surface shall be rough, clean and moist. It shall be laid on the surface of the concrete floor. If the surface is smooth, the hair shall be cut. 4. When cement mortar is used as the floor leveling layer, the cement slurry with a water-cement ratio of 0.4-0.5 should be brushed prior to laying, and it should not be walked on with the brush. 5. The floor and parquet floor (including wood joists, wood), the selection criteria of the wood used and the moisture content when laying should be within 12 degrees 6. The wooden skirting board should be set after polishing the wooden floor. 7. There shall be no open flame in the room where adhesives are placed on the wooden floor. >>> Links: Construction Tips for Wood Flooring The acceptance requirements for the plate material paving project are as follows: The acceptance requirements for the installation of wooden floors should meet the following requirements: (1) The material should meet the household's requirements and current product standards. (2) The floor installation (bonding) should be firm, no sound, no looseness. (3) The surface of the wooden floor should be polished with no flat spots, shavings and burrs. The varnished floor should have a clear pattern (grain). (4) The parquet floor seams should be aligned, the gap width is uniform, the surface is clean and there is no glue overflow phenomenon. (5) The base plate of the skirting board is tightly connected, and the base plate of the skirting board is straight and is in close contact with the wall. Flooring cement room decoration paint Made of 100% high quality durable steel with hard zinc plating, Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener. Hex Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal and wet environments. Hex Washer Flange Screw ,Indented Hex Washer Head Self-Drilling Screw,Hexagon Flange Self Drilling Screw,Hex Head Self Drilling Screws Handan Jiankun Hardware Products Co., Ltd , https://www.jkscrew.com
Paving of plate materials