Wooden door installation knowledge:

1. Installation conditions

(1) The wooden door must be installed with a reserved opening. It is strictly forbidden to install the side wall.

(2) The wooden door shall be installed after the installation of the groundwork (such as floor tiles and stone) of the opening, and after the wall putty is scraped and polished, the wall shall be attached to the wall and the hole at the stone. Sideways) for installation work.

(3) The humidity of the installation wall is <25%. If the humidity is >25%, the moisture barrier should be installed on the installation wall.

(4) The installation site environment is clean, free of clutter, and no cross work.

2, installation tools electric hammer, woodworking hoe, plane, flat boring, fine tooth saw (gang saw), screwdriver, square ruler, tape measure, hanging hammer, level ruler, electric drill, hole opener, stamp, corresponding specifications drill.

3, installation materials iron joints, 60 nails, 25 and 20 self-tapping screws, 502 glue, towels or cotton yarn, wood cutting, small wooden strips, pig hair brush, styrofoam, milky white glue, door locks, hinges, Door suction, wall moisture-proof material.

Wooden door installation sequence:

1. Assemble the door cover.

First find the door cover and the vertical plate. According to the back number, the joints should be on the same plane, and the joints should be glued.

2. Install the door cover.

Put the assembled door cover into the door hole as a whole, and fix the door cover around with the small wooden strip. The two sides of the door cover should be on the same plane as the wall. Then check whether the whole door cover is perpendicular to the ground. The top cover and the two sides of the door cover Whether the two corners of the board are at right angles, whether the door panel is bent or not, and the iron pieces are twisted at both ends to wrap the wall.

3. Install the door leaf.

The hinge groove is opened first, and the distance between the hinge groove and the two ends of the door leaf is preferably 1/10 of the height of the door leaf.

4. Install the door lock.

After loading, check whether the door leaf and door lock switch are flexible, whether the seam is flexible, and whether the seam is in compliance with the specifications.

5. Install the door cover line.

Cut the door line with right-angled edges into a 45-degree angle, trim it with a woodworking planer, insert it into the door pocket at the right angle, and glue the door sleeve wire to the door panel with the floor glue.

6. Install the door suction at the corresponding position.

When installing the wooden door, first check whether the wooden door parts are complete, whether the dimensions of each part are correct, and whether the door is assigned to the corresponding position to match the door hole.

[ Follow the WeChat public number "Jiuzhengmen Window Network" industry's first large size, the industry's latest information, industry management marketing, professional knowledge, cutting-edge trend interpretation, wonderful sharing, please pay attention! More industry exchanges, please join the nine positive door window network exchange Group

Apart from the classical Residential House,  we feel there are big demands for Tiny House (11M2-50 M2). Those tiny prefab houses, Compact Houses can be used as back yard studio, storage, living, garden office, garden studio, vocational house, cabin, etc. The structure & insulation of those houses are made by structural insulated panels (SIPs) or light gauge steel frame. Decoration accessories are optional items. The houses arepanelized, very easy to be installed (DIY),strong,green,quiet,and cozy. The following are some ready to go house plan. We also welcome customized plan.

Tiny House

Tiny House,Compact Houses, Small House, Tiny Prefab House, Tiny House Manufacture

Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com