With the introduction of the national policy of promoting energy conservation and environmental protection, the lighting industry has promoted energy-saving and environmental protection lamps. At one time, the market has flooded a lot of energy-saving lamps, and many businesses are devaluing "energy-saving" on selling points. Energy-saving seems to have become a fashion.

As the name suggests, "energy saving" is power saving. In fact, far more than that. However, due to the lack of market guidelines, many consumers have made many mistakes in purchasing and using them, leading some consumers to resist the new products. In view of this, the reporter interviewed everyone in charge of the lighting industry, summed up the following three consumer misunderstandings, for consumers to point out a "light."

Misunderstanding 1: Energy-saving lamps are expensive, easily damaged, and save energy.

Phenomenon: There are many consumers have had this problem: buy energy-saving lamps to go home, electricity is saved, but easy to damage, sometimes a few bulbs a month. The price of energy-saving lamps is higher than that of ordinary light bulbs. In fact, the money for light bulbs is not enough to save electricity. As a result, consumers have complained that "energy-saving lamps" do not "save money."

According to lighting experts, energy-saving lamps are mainly reflected in two aspects:

(1) Energy-saving lamps have higher power than ordinary tungsten lamps. A one-watt energy-saving lamp is comparable to a five-watt tungsten lamp. Ten-odd-watts can be equivalent to more than fifty watts. Depending on the brand, different types of energy-saving lamps have different effects. High-power energy-saving lamps can save more power.

(2) Energy-saving lamps emit less heat than tungsten lamps. In the case of tungsten lamps, the temperature of the room air temperature rises due to the fact that the heat emitted by the tungsten lamp is much higher than that of the energy-saving lamp, and the temperature of the air conditioner is accordingly lowered. The use of energy-saving lamps has a much lower indoor temperature, so the savings in air-conditioning costs also save power on the other side.

Expert Weapons: As for the phenomenon of frequent failure of energy-saving lamps, it is due to the quality of the products and the improper use of consumers. Due to uneven technology, some energy-saving lamps are easily damaged.

In addition, the use of energy-saving lamps should not be in an excessively humid environment and pay attention to the appropriate voltage. The humid environment will have a certain influence on the service life of the lamp, and the stability of the voltage has the greatest influence on the life of the energy-saving lamp. Consumers should pay attention to whether the entire circuit and the purchased energy-saving lamp are of the same level, otherwise it will cause damage. This problem is best consulted experts when purchasing and installing.

Misunderstanding 2: When the light bulb is still on, you can continue to use it.

Phenomenon: Some citizens think that the more durable the energy-saving light bulb is, the better, as long as it is still bright, it can continue to be used, and the longer it is used, the better the quality of the light bulb.

Analysis of the industry, this is a misunderstanding caused by the consumer's traditional thinking. In fact, each energy-saving light bulb has its specified service life, the time has come, and the light bulb will have to be "end of life." In many public places in foreign countries, each one of the energy-saving light bulbs sold will be recorded on the computer. When it is bought and when it is used, it will be replaced even if the time is up.

Expert Weapon: Each light bulb has its "light decay" process. The so-called "light decay" is the gradual darkening of light bulbs due to the loss of energy and materials during use. For example, the life span of an energy-saving lamp is 10,000 hours. After this service life, even if the lamp can continue to be used, the brightness will be significantly reduced. Because of their frequent use, the public is not aware of this bright environment. Experts believe that when the service life of an energy-saving lamp reaches its end, it is recommended to abandon it even if it can still light. Otherwise, its energy-saving effect will be greatly reduced. If it takes a long time, it will hurt the eyes and make people feel irritated.
In addition, when consumers purchase energy-saving lamps, they must look at the life of the instructions. The service life does not start from its production date, but it starts from the date of use.

Misunderstanding 3: The function of the light is lighting, the brighter the better.

Phenomenon: The traditional thinking is that the function of a light bulb is lighting, of course, the brighter the better. Therefore, some consumers use high-intensity bulbs in indoor lighting arrangements. The extension to public places, such as highways, libraries, etc., can sometimes result in excessive brightness.

Expert analysis, in foreign countries pay more attention to lighting design, will design different lighting solutions according to the actual situation. For example, in the area of ​​public lighting, how much light efficiency can be designed on a street, in terms of 24 hours, and what type and intensity of light is used in any road section. Otherwise, improper design, drivers will affect the viewing angle film for a long time, people will feel tired.

In China, some family homes, such as sleeping quarters, use spotlights. People feel excited that they cannot sleep. Therefore, the light is not better.

Experts Weapons: Early in the foreign countries, "lighting design", the design is also more developed, there are professional designers for public places or families to design scientific lighting effects. In China, this piece is still relatively weak. With the implementation of national lighting designers qualification certification, this situation should be improved.

Illumination is not only about emitting light, it is also a kind of life, a kind of scientific technology. Whether it is reasonable or not directly affects people's physical health and mental state.

Lamps choose NVC lighting design lighting air conditioning prices residential layout

Electro Galvanized Wire

Galvanized iron wire is designed to prevent rusting and shiny silver in color. It is solid,durable and extremely versatile, it is widely used by landscapers, craft makers, building and constructions,ribbon manufacturers, jewelers and contractors.Its aversion to rust makes it extremely useful around the shipyard,in the backyard, etc.

Electro Galvanized Wire,Electro Galvanized Steel Wire,Electro Galvanized Iron Wire,High Tensile Strength Galvanized Wire

Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com