Material selection:

1, polished tiles: the surface is smooth and bright. 2. Vitrified tiles: The surface is smooth and bright, but it is denser than the polished tiles and does not seep through. 3, mosaic: The current mosaic variety and technology gradually increase, high-quality glass mosaic is expensive, in 300 yuan / square meter or more, can be used to decorate. 4, marble: the general family with caution, it is best to use when the role of local embellishment. 5, sealant: Now the general household tile, has no white cement groove sewing. Colourful caulking agents can sometimes give unexpected results.

usual format:

Tile size 400x400mm, 500x500mm, 600x600mm, 800x800mm

Mosaic size 20 × 20mm, 25 × 25mm, 30 × 30mm, thickness in order between 4mm-4.3mm.

Price: From the price analysis, general domestic glazed wall tiles, first-class product prices at 40 yuan per square meter, deep color glaze prices slightly higher than the light color glazed brick prices, plus auxiliary materials and labor costs, etc., cost in each About 80 yuan square meters. The price of imported glazed wall tiles is 1-3 times higher than domestic ones.

Tile selection process

The first step: Take any piece from the packing box to see whether the surface is smooth and in good condition. The glaze should be uniform, bright, no spots, lack of glaze, bumps, and the surrounding edges should be regular. Glazing is not bright, astringent, or air bubbles are quality problems.

Step 2: Take another piece of brick and align the two pieces. The smaller the middle gap, the better. If it is a pattern tile, four pieces must be used to piece together a complete pattern, and whether the pattern of the brick should be connected and clear should be considered. Then take out a box of bricks and place them on a large flat surface. Look at the effect from a little distance away. Whether it is white or other colors or patterns, the color should be the same. If there are individual bricks, shallow points, it will be difficult to see. , affect the entire decorative effect

The third step: put these bricks together and erect them. Compare the size of the bricks. If the deviation of the small bricks is plus or minus 1 mm, the big bricks are allowed to be plus or minus 2 mm.

Step 4: Take a piece of brick to knock another piece, or use other hard objects to knock on the brick. If the sound of the brick is crisp and loud, the quality of the brick is good and cooked; if the sound is abnormal, there is heavy leather in the brick. Or crack phenomenon: when the heavy skin is the brick forming, the material in the air is not discharged, resulting in poor combination of materials and materials, internal cracking, can not be seen from the surface, only the sound can be identified.

Tile Glass Marble Cement Decorative Marble Tiles Glass Bricks Technology Glass Tiles Price Tiles Specifications