Reciprocating pump main structural features and working principle

One. The main structure of the reciprocating pump and the main working principle Working principle: When the piston moves from left to right to form a negative pressure within the pump cylinder, sump liquid into the pump cylinder through the suction valve. When the piston moves from right to left, the liquid in the cylinder is squeezed, the pressure increases, and it is discharged by the discharge valve. Pistons reciprocate, each suction and discharge a liquid, called a work cycle; this pump is called a single action pump. If the piston from time to time, each inhalation and discharge of liquid twice, known as double-acting pump. Pistons move from one end to the other end, called a stroke. Reciprocating pump flow and head reciprocating pump flow and pressure head has nothing to do with the size of the pump cylinder, piston stroke and reciprocation frequency. The theoretical flow of a single-acting pump is: QT = Asn The actual flow of a reciprocating pump is smaller than the theoretical one and decreases as the head increases, due to a loss. Reciprocating pump head and pump flow and pump geometry has nothing to do, but by the pump mechanical strength, the power of the prime mover and other factors. Reciprocating pump installation height and flow adjustment Reciprocating pump start without filling liquid, because the reciprocating pump self-priming capacity, but the vacuum suction height also depends on the installation area of ​​the atmospheric pressure, the nature of the liquid and the temperature changes , So the reciprocating pump installation height also has certain limit. Reciprocating pump flow can not be discharged with the valve on the pipeline to adjust, but should be used by the bypass pipe or change the reciprocation of the piston to change the piston stroke to achieve. Before starting the reciprocating pump, the valve in the discharge line must be opened. The piston of the reciprocating pump is connected with the prime mover by the connecting rod crankshaft. The prime mover motor, steam engine can also be used. Reciprocating pumps for high-pressure head, small flow, high-viscosity liquid delivery, but not for transporting corrosive liquids. Sometimes directly driven by the steam engine, delivering flammable, explosive liquids.

Polishing Wheels

Polishing wheels are widly sued on steels ,titanium, copper, brass, aluminum, and also all types of non-ferrous materials, such as gems, stones, glass, plastic, acrylic, ceramics, carbon fiber. Polishing wheels can be all types Grinding Wheels which have more fine grits to achieve the aim of low value of Ra.

Polishing wheels can be diamond grinding wheels, or conventional abrasive grinding wheels, like PVA grinding wheels, silicon carbide grinding wheels, polishing wheels, rubber grinding wheels. Polishing wheels can also be made to polishing Mounted Point with shanks.

Kemei produce and aim on different types of grinding tools, such as aluminum oxide grinding wheel, silicon carbide grinding wheels, mounted points, Diamond Grinding Wheels, CBN Grinding Wheels and wheel dressers.

If you need any type of grinding tool or professional advice about grinding on your workpieces. Don`t hesitate to contact us!

Polishing Wheels,Rubber Polishing Wheel,Mirror Polishing Wheel,Buffing Wheel Dressing Tool

Henan Kemei Abrasives Co.,LTD , https://www.kmgrindingwheels.com