We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Spotlight Closet,Small Led Spotlights,Kitchen Ceiling Spotlights,Spotlight Ceiling Light Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Precautions for use of variable speed drive bearings Precautions for use of variable speed drive bearings
Precautions when using variable speed bearings: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Know the shape and connection scale of the variable speed drive bearing.
2, variable speed drive bearings can be horizontally settled; can also be vertical or skewed to settle. Can be forward and reverse rotation. Positive and negative input and output power (ie deceleration or speed increase).
3. No matter what kind of device method is used for variable speed transmission bearing; there is a need for scale cooperation with its coupling parts.
Referral selection:
The cooperation between the inner ring hole d and the shaft is as H7/h6,
The cooperation between the pin hole on the middle ring and the drive is based on H7/r6.
The cooperation between the outer ring D and the housing is based on H8/h7.
The cooperation between the transmission and the hole on the output shaft is coordinated by the gap; the amount of the gap is 0. 2~0. 5mm.
4. Axial positioning of variable speed transmission bearings: one of the three turns of the ring is axially positioned; the other two axes do not need to be axially positioned.
5, the direction of the transformation, the outer ring and the inner ring are flat key positioning. The middle circle is using the drive positioning.
6. The variable speed transmission bearing can accept a small external force in the radial direction; however, it is not suitable to accept a large working load.
7. Transmission ratio; both are transmission ratios according to the first device method. If other device methods are used; the transmission ratio should be calculated.
8. At the extra speed (1500 rpm); select the variable speed drive bearing type according to the required power (Kw).
9. When based on the working torque; the type should be selected accordingly.
10. The choice of reducer type should be the same as the type of variable speed drive bearing.
Recommend to friends comments close window Bearing related knowledge Bearing temperature viewing method Analyze the bearing equipment method The importance of selecting the smoothness of the imported bearing and the smooth effect of the imported bearing. Analyze the cause of the overheating of the motor bearing and the disposal method.
This article links to http://
Please indicate the bearing network http://
Previous:The following should be paid attention to when using "IKO linear bearing smoothing equipment": the demand for steel for rolling bearings
Precautions for use of variable speed drive bearings
Source: China Bearing Network Time: 2014-09-14