Functional hardware refers to hardware components that can perform certain functions in the cabinet, such as connectors, hinges, and rails. Among them, the hinge is the most to be tested, it not only has to connect the door panel of the cabinet, but also bears the weight of the door panel alone; the slide rail of the other drawer can not be ignored, it carries all the weight of the drawer, only the high quality sliding rail pulls the drawer It is not too hard. Therefore, these small hardware and small accessories must be of good quality in the choice.

When purchasing functional hardware, first carefully observe whether the appearance process is rough, and then fold it by hand several times to see if the switch slides freely. Is there any abnormal noise, is it matched with the grade of the furniture, and then rubbing it with the hand, like a class Compared with products, the products with heavy weight are relatively good in materials, and try to use the products of manufacturers with long history and high reputation.

In addition, decorative hardware accessories, such as handles, should be considered in harmony with the color and texture of the furniture. The handle of the cabinet should not use the handle of solid wood, otherwise the handle will be easily deformed in a humid environment.

For consumers to easily ignore the tendency of hardware and accessories selection, identification, review, the general description of the hardware types appearing in the market, only for consumers comprehensive reference, comparison, selection

(1) Hinge: The number of kitchen door switches is up to several thousand times, and the advantages and disadvantages of door hinges are very important.

In the usual process of switching the cabinet door, the most likely to be tested is the hinge. It not only needs to accurately connect the cabinet and the door panel, but also bears the weight of the door panel alone, and the number of times the cabinet door is switched tens of thousands of times, and the consistency of the door arrangement must be kept unchanged, otherwise it may be after a period of time Front and back. Without a pair of "reinforced steel" and perfect flexibility, it is difficult to shoulder this responsibility.

(2) Drawer guide rail: The guide rail is one of the important hardware in the kitchen cabinet hardware. Its importance is second only to the hinge. The condition and ratio of the guide rails used by the kitchen cabinet company are similar to the hinges. About 95% of the cabinet companies use the price. Low quality guide rails. In comparison, the advantages and disadvantages are not distinguished by the appearance and the way they are used. The main difference lies in the differences in materials, principles, structures, equipment, production processes, etc. As long as you pay a little attention, you can pull the drawer to the truth.

(3) Skirting board: It is often overlooked. In fact, the first problem with the kitchen cabinet may be it. Because it is closest to the ground, if the ground is very moist, it is likely to swell and mold. The skirting board has two kinds of wooden skirting boards and matte metal skirting boards. Wooden skirting board manufacturers generally use the corner scrap left when the cabinet is used, and the cost is low. However, because the skirting board is very close to the ground, the wooden material is easy to absorb water and tide, and the water vapor will rise along the skirting board to endanger the entire cabinet. This is why some kitchen cabinets will "get fat" when they are used for a while.

(4) Pulling baskets: The items in the kitchen are the most frequently contacted by us every day. The utensils in the kitchen are also the most varied in daily life. The three meals a day are indispensable for the entrance and exit of the kitchen, and the movement of pots and pans is inevitable. Move. How to establish a good living order in such a frequently moving space is an annoyance faced by many families. And this kind of trouble can only be solved by pulling the basket - this broad-minded mind, to put all kinds of items in his arms, without any complaints. The basket has a large storage space, and can reasonably divide the space so that various items and appliances are available. In this respect, Germany's big monsters and small monsters pull baskets are more outstanding. They not only can maximize the use of built-in space, but also make full use of the abandoned space at the corner to maximize the use value. According to different purposes, the basket can be divided into a stove pull basket, a three-sided pull basket, a drawer pull basket, an ultra-narrow pull basket, a high-deep pull basket, a corner pull basket and the like.

(5) Steel pumping and cutlery discs: Steel pumping and cutlery discs are accurate, standardized, easy to clean, not afraid of pollution, and will not be deformed. They have an irreplaceable effect on the maintenance and use of kitchen cabinet drawers. Kitchen cabinet companies in developed countries such as Germany, the United States, and Japan are widely used. Therefore, when you have roughly observed the appearance of the kitchen cabinet, you should open each drawer and take a look. If you use steel pumping and knife and fork combination, the cost of the product is higher, the cabinet combination is more standardized, and vice versa. Drawers are less expensive. Steel pumping and cutlery discs are also imported and made in China, mainly on the rail and surface treatment.

(6) Spotlights: General glass door cabinets or kitchen cabinets with lighting tops are often equipped with spotlights, which are divided into probe type and inner horizontal type, depending on individual preferences. But pay attention to the choice of 12V spotlights with transformers, because for safety reasons, the country explicitly prohibits the use of 220V voltage for furniture lights.

(7) Faucet: The faucet can be said to be the most intimate part of the kitchen, but its quality is often overlooked when purchasing. The faucet proved to be the most problematic place in the kitchen. If you use a low-quality inferior faucet, there will be water leakage, and the untimely consequences will be very serious. Therefore, you should pay great attention to the quality of the product when purchasing.

In most kitchens, faucets are often a rare highlight. This is because the faucet can give the designer a large space for display, and the design elements such as lines, colors and shapes can express many exciting design inspirations, and the aesthetics and artistic light can be realized. At the same time, the high-quality faucet is the embodiment of technology, and the requirements for the craft are extremely high, which just meets the aesthetic pursuit of many fashion people's quality of life. A number of factors have made cabinet makers more cautious about his choices.

(8) The basin is an object that is used at a relatively high frequency in the kitchen, so its choice is also extremely important. Most of the common basins are stainless steel, artificial stone, ceramics and stone products, depending on the owner's preference and the overall style of the kitchen. If the style of the kitchen is more fashionable and avant-garde, it is more suitable to use stainless steel basins. This choice is not only because the metallic texture of the stainless steel material is quite modern, but more importantly, the stainless steel is easy to clean, light in weight, and also has the advantages of corrosion resistance, high temperature resistance, moisture resistance, etc., in line with the quality of life of modern people. Claim.

       Copper Press Fitting

Copper press fitting,Copper pipe fitting
Copper press fitting is a kind of up-to-date.healthy.eco-friendly and safe pipeline.
Suit Medium:Cold Water, Hot Water, Compressed Air, Gas, Oil Etc
Press tool: Novopresse
Proper temperature: -20°C up to 120 Â°C (for drinking system and sanitary ware systems), 180 Â°C for solar applications
Pressure: up to 1.6mpa (16bar)
Areas of use: Drinking water, heating, rainwater, solar systems, fire extinguishing systems, sprinkler systems(wet), ship building, inter gases, cooling water pipes, compressed air(oil free),boiler, water heater 
Press fitting range:
Coupling -- Straight coupling FF press, Reducing coupler FF press, Fitting reducer MF press 
Elbow -- Bend 90°FM press, Bend 90°FF press, Bend 45°FM press, Bend 45°FF press
Tee -- Equal tee FFF press , Reducing tee FFF press 
Other fittings -- Endcap press, Full crossover FF press, Partial crossover FM press, wallplate Elbow press

Our Advantages
* Free sample: we can provide a few free sample for evaluation.
* After-sales service: we provide after-sales technical support for clients.
* Strict Quality control: we have 100% inspection before delivery to ensure every pieces are in good quality

Production and package

Factory

Copper Press Fitting(EN1254)

Copper Press Fitting,Copper Tee,Copper M-Profile Press Fitting,Copper V-Profile Press Fitting

WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , http://www.kasinpressfitting.com