Sanmei Motor Introduces Switching Power Supply Secondary Side Synchronous Rectifier Control IC

Sanmei Motor Introduces Switching Power Supply Secondary Side Synchronous Rectifier Control IC

Sanmei Electric Co., Ltd. announced on August 7, 2015, a control IC "MM3667AFFE" for a secondary side synchronous rectification circuit of a switching power supply (AC-DC converter). Replacing the secondary diode rectifier with a conventional diode rectifier into a synchronous rectifier made up of this new product and power MOSFET can increase the conversion efficiency. According to the company, “In addition to easily satisfying various stringent energy efficiency regulations year by year, it is also possible to reduce the heat generation and to reduce the number of heat sinks, which contributes to the miniaturization and thinness of electronic products.” The new product is suitable for flat panel TVs, home consoles, AC adapters, and switching power supply modules.

The circuit topology of the switching power supply supports half-bridge current resonance (LLC) and flyback quasi-resonant mode (QR). By switching the operating mode, you can choose one of them. A gate drive circuit that drives an external power MOSFET is integrated, and the drive voltage is +6.0 to 15.0V. The user can set the shutdown threshold. The off-time detection method is the drain voltage detection method. By adopting the company's unique control method, it is possible to prevent backflow, misdetection, etc., and achieve stable work.

The input voltage range is +6.0 to 15.0V. The switching frequency range is 25k to 500kHz in the LLC mode and 25k to 200kHz in the QR mode. The current consumption is 0.66 mA in LLC mode and 0.65 mA in QR mode. The package uses SOP-8J with dimensions of 6.00mm x 5.02mm x 1.65mm. Sample price is 60 yen (excluding tax). Mass production has begun. The current mass production scale is 300,000 per month, and will increase to 3 million per month after 2018. (Reporter: Yamashita is better than himself)

      Copper Press Fitting(AS3688)

Copper press fitting(AS 3688) is a kind of up-to-date.healthy.eco-friendly and safe pipeline.
Suit Medium:Cold Water, Hot Water, Compressed Air, Gas, Oil Etc
Press tool: Novopresse
Proper temperature: -20°C up to 120 Â°C (for drinking system and sanitary ware systems), 180 Â°C for solar applications
Pressure: up to 1.6mpa (16bar)
Areas of use: Drinking water, heating, rainwater, solar systems, fire extinguishing systems, sprinkler systems(wet), ship building, inter gases, cooling water pipes, compressed air(oil free),boiler, water heater 
Press fitting range:
Coupling -- Straight coupling FF press, Reducing coupler FF press, Fitting reducer MF press 
Elbow -- Bend 90°FM press, Bend 90°FF press, Bend 45°FM press, Bend 45°FF press
Tee -- Equal tee FFF press , Reducing tee FFF press 
Other fittings -- Endcap press, Full crossover FF press, Partial crossover FM press, wallplate Elbow press

Our Advantages
* Free sample: we can provide a few free sample for evaluation.
* After-sales service: we provide after-sales technical support for clients.
* Strict Quality control: we have 100% inspection before delivery to ensure every pieces are in good quality
Production and package








Factory

Copper Press Fitting(AS3688)

Australia copper press fitting,AS3688 copper press fitting,Copper V-profile press fitting,Copper press fitting

WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , https://www.kasinvalvefitting.com