The traditional
swimming pool waterproofing mainly uses three kinds of tiles, coils and
coatings. Laying ceramic tiles, where there is water is relatively slippery;
some places fall off or crack, which has great safety hazards; between the
gaps, it is easy to breed bacteria. The coil material is fast in construction
and has good waterproof effect, but it needs to be cut when paving, especially
in the place where there are many detailed nodes, it is easy to leave troubles
and easy to leave hidden dangers. The concrete pool
sealer has simple construction, and forms a continuous waterproof whole
after film formation, and has good construction and waterproof effects on
various corners and facades.
However, the
problems encountered in the use of ordinary pool
sealant: outdoor use is easy to change color, the effect of disinfectant
water (chemical medium) in water will accelerate the discoloration and peeling
speed of the coating; the anti-wet and anti-slip effect is not ideal, and the
surface anti-wet effect is also added by adding quartz. Sand increases the
surface roughness and is easy to injure and has unsafe factors.
So, what
conditions must be met for the water park and swimming
pool sealer system?
1. The coating
should not peel off, otherwise it will affect the aesthetic and circulating
water system.
2. The coating
must be environmentally friendly and meet the drinking water level.
3, the coating
can withstand sun exposure.
4, the coating
requirements are beautiful.
5, the coating
should have a certain anti-slip function.
6, the entire
water park pool should have waterproof and anti-seepage function.
Advantages of
UMS-AUPT Polyurea Waterproof Non-slip Elastic Coating System:
1) UMS-AUPT
brushed polyurea waterproof anti-slip coating is a high-strength elastic
waterproof material with high water resistance, anti-skid and walking comfort;
2) Waterproof,
anti-corrosion and decorative integrated design. The concrete
pool sealant is excellent in aging resistance, the coating is full, the
decoration is beautiful, and the color does not change over time;
3) Good
adhesion, long-term use, no foaming, no falling off, no empty drum;
4) High safety
factor and efficient anti-slip performance;
5) Excellent
mechanical properties, tensile strength above 300%, tensile strength above
20Mpa, to ensure that the coating resists cracking of concrete;
6) Excellent low
temperature flexibility, ensuring long-term use without cracking and falling
off in the environment of -40 ° C ~ -60 ° C;
7)
Anti-corrosion performance is very prominent, can withstand the erosion of
water, acid, alkali, salt, oil and other media;
8) Simple
construction, roll coating, recoating or repairing construction is simple, no
special treatment is required.
Polyurea
is a combination of waterproof, anti-corrosive, anti-slip and decorative, which
will definitely lead the application trend of water park and swimming pool
painting system. Aquariums, aquariums, fish ponds and other water facilities
also use polyurea coatings as the best choice for sealing and waterproofing.
Concrete Pool Sealant,Swimming Pool Sealer,Concrete Pool Sealer,Pool Sealant UMS New Materials Industry Co.,LTD , https://www.ums-factory.com
FIXTEC 1800W 255mm Mini Sliding Compound Miter Saw
Whether you're cutting baseboards or crown molding, the FIXTEC 255mm double-bevel sliding
Compound miter saw provides quick, accurate cuts to complete the job. Thanks to a powerful
Motor, an easy-to-adjust cam-lock miter handle, convenient miter and bevel stops, plus a tall fence for accomodating
Oversized moldings, this saw is ready for a range of crosscutting and miter cutting applications.
Smart, Powerful Design for Quick, Accurate Cuts
The FIXTEC double-bevel sliding compound miter saw's 255mm blade is backed by a powerful and
Dependable 1800W motor. Offering a no-load speed of 5, 000 RPM, it makes quick work of cutting
Framing or molding, as well as other crosscutting and miter-cutting jobs.
This sturdy saw is designed to deliver precise cuts, allowing for the versatile setups required for
Miter applications. The precise miter system's adjustable stainless steel miter detent plate features
9 positive stops for easy setup and improved efficiency. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, and features a convenient
Detent override, which allows you to adjust the miter setting without the saw slipping into the miter
Detents.
Tall Fencing and Compact Sliding Rails
The fence slides out of the way easily when it's time to make bevel cuts. This saw stays compact
Thanks to its sliding saw dual horizontal steel rails, which feature an innovative clamping mechanism
And linear ball bearings for increased accuracy and durability.
Increased Bevel Capacity and Convenient Stops
This saw is designed to deliver quick, accurate bevel cuts. You can easily set up for bevel cuts that
Measure between 0 and 45 degrees to the left and to the right. This handy setup provides increased
Capacity for big jobs and allows you to flip the saw instead of the material. Plus, with several bevel stops,
It makes finding and setting the bevel angles a quick, easy process.
Ideal for a range of applications, the saw's unique back fence design allows it to deliver clean, 45-degree
Bevel cuts through dimensional lumber.
Portable and Compatible with the Laser System
This lightweight sliding compound miter saw weighs just 16.5Kg and features a built-in carry handle, so
You can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the
End of the day.
Packing details
A. Selling unit packing
FIXTEC Angle Grinder FMS25502
Is packed in a color box
What's in the box?
1.1pc dust bag
2.1pc 255mm blade
3.2pcs extension wing
4.1pc work clamp
5.1pc hex key
6.1 set carbon brush
7.1 instruction manual
About us
FIXTEC, a unique brand of power tools and accessories, is developed to make professional tools more affordable. FIXTEC team is based in China to support global marketing and we are looking for local distributors as our long term partners instead of setting up our own sales team to save the cost and maximize the benefits of our partners. Through continuous innovation and improvement, we will provide exceptional value to our partners. FIXTEC, better tool, better life.
Quality control
We know what quality means, so we always focus on quality control.
Customer questions & answers
Q: What's your MOQ?
A: Our MOQ is 20 units per model for FIXTEC brand.
Q: What's your payment terms?
A: We could accept L/C sight, T/T and Paypal.
Q: What's the delivery time?
A: We could deliver the goods within 7 days after order confirmed. Just like purchase from your local distributor, but with more cometitive prices.
Q: Can I get free samples?
A: Yes, we could provide free samples and deliver with freight collected.
Model Number
FMS25502
Voltage
220-240VÂ ~Â 50-60Hz
Rated power
1800W
No load speed
5000rpm
Dimension of saw blade
255mm
Mitre table angles
-50 0 /-31.6 0 /-22.5 0 /-15 0
0 0 /15 0 /22.5 0 /31.6 0 /50 0
Bevel angles
L eft 0-45 0  / right 0-45 0
Laser output
<5Â mW
Cutting capacity,
Â
c ross  cut at 0° mitre, 0° bevel
90  x 305 mm
mitre cut at 45° mitre, 0° bevel
90  x 21 5mm
compound cut at 45° mitre, 45° bevel
38 x 21 5mm
bevel  at  0° mitre,  45° bevel, right & left
38 x 305 mm
Weight
16.5Kg
Protection class
II
Fixtec 1800W Cutting Tool 255mm Sliding Compound Miter Saw (FMS25502)
Model NO.: FMS25502
Condition: New
Voltage/Frequency: 220-240V/50Hz,60Hz
Package: Color Box
No-Load Speed: 5000rpm
Input Power: 1800W
Trademark: FIXTEC
Specification: CE, RoHS, SGS, GMP
Origin: Nanjing, Jiangsu.
HS Code: 84659100
Product Description