Family health five poison paint coatings hazard

Core Tip: Paint Poison: Some furniture paints and other organic substances can volatilize benzene and phenol gas harmful to the human body. Furniture decorative materials, man-made fiberboard and some foam insulation materials can also emit formaldehyde gas, causing respiratory tract. A series of symptoms appear with inflammation.

At home life, you need to be alert to the five poisons that endanger family health:

Paint poison: Some furniture paints and other organic substances can volatilize benzene and phenol gas harmful to the human body. Furniture decorative materials, man-made fiberboard and some foam insulation materials can also emit formaldehyde gas, causing respiratory inflammation. Series of symptoms.

Gas Toxic: If you find indoor gas leaks, you must not activate any electrical switches. Gas leakage, first turn off the gas main valve or angle valve, open the door, window, let the gas dissipate, and then find out the cause of the leak.

Fashion poison: Some people's fashion is used to dry cleaning. When dry cleaning, the clothes are exposed to a certain concentration of tetrachloroethylene. When the skin absorbs tetrachloroethylene gas, it may cause cancer and damage liver function. Do not wear clothes immediately after dry cleaning. Hang them in a ventilated place to allow harmful gases to escape.

Screen poison: Fluorescent screens such as televisions and computers produce a harmful gas that can cause cancer. Watch TV as far as possible from the TV.

Dead water poisoning: When the tap water is unscrewed in the morning, yellow water will flow out. This is due to the "dead water" that does not flow for a long time in the water pipe, which is caused by metal substances. This water contains a variety of substances harmful to the human body and takes a few minutes to use.

Global hardware network

Concerned about surprises

Label: Family health five poison paint coatings hazard

Previous: Cement plate should be treated with caution Next: How does the inverter work?

  High purity Polyaluminum chloride PAC 30% supplier



 

 1.PRODUCT APPEARANCE: APPEARANCE: The solid product is produced by the spray drying technology and the obtained product is light yellow, Corresponding liquid products is light yellow.

 

2.RAW  MATERIALS:Domestic high-quality aluminium hydroxide,High-quality calcium aluminate,High-quality hydrochloric acid

 

3.USAGE: Drinking water treatment      Treatment of high-purity water

 

4.Product Advantages:

1). Flocculation ability, high adsorption activity, floc formation and deposition of fast
2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation
3).easily to use and good effective  

 

5.Storage: The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .

 

6.Application method:
1)The liquid product can be used directly or used after dilution.
Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.
2)he specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton

water treatment chemical

Water Treatment Chemicals

Water Treatment Chemicals,Waste Water Treatment Chemical,Water Treatment Chemical

Shandong Tiancheng Chemical Co., Ltd. , https://www.akdchemical.nl