Stainless Steel LED Pool Lights Stainless Steel Led Lights,Wall Mount Pool Light,Submersible Led Pool Light,Stainless Steel Casing Lights Guangzhou Qshine Pool Lights Manufacture Co., Ltd , https://www.qshinepoollight.com
The 6061 T6 aluminum tread plate has the highest corrosion resistance of all the aluminums that have been heat treated. It is an alloy that has been formed with silicon and magnesium. It has a lower strength than other comparable aluminums, but is still widely used. This is partly due to its corrosion resistance and partly due to its excellent mechanical properties. There are a variety of ways you can form 6061 aluminums, such as through machining and welding. The machinability rating of this alloy is 90 percent. It also has great joining capabilities. If needed, this product can be anodized or have other coatings applied.Â
Â
Available Dimension
Â
Mill finish Surface
Bright finish Surface
Thickness  (mm)
1.00---6.50mm
1.20---6.50mm
Pattern height
Sheet Thickness from 1.0mm to 2.0mm, Â bar height: 0.50mm
Sheet Thickness from 1.0mm to 2.0mm, Â bar height: 0.50mm
Â
Sheet Thickness from 1.0mm to 2.0mm, Â bar height: 1.00mm
Sheet Thickness from 1.0mm to 2.0mm, Â bar height: 1.00mm
Â
Sheet Thickness above 2.0mm, Â bar height: 1.50mm
Sheet Thickness above 2.0mm, Â bar height: 1.50mm
Width (mm)
Maximum 1500mm
Maximum 1650mm
Length (mm)
Maximum 6000mm
Maximum 6000mm
Paper interleaves
On request for selected
On request for selected
Normal size
1200×2400mm, 1219×2438mm,  1219×3048mm
1200×2400mm, 1219×2438mm,  1219×3048mm
Â
Chemical composition of aluminum tread checkered plate                       Â
Alloy (%)
5052
5083
5086
5754
6061
7075
Si
0.25
0.40
0.40
0.40
0.40_ 0.80
0.40
Fe
0.40
0.40
0.50
0.40
0.70
0.50
Cu
0.10
0.10
0.10
0.10
0.15_ 0.40
1.2_ 2.0
Mn
0.10
0.40_ 1.0
0.20_ 0.7
0.50
0.15
0.30
Mg
2.2_ 2.8
4.0_ 4.9
3.5_ 4.5
2.6_ 3.6
0.8_ 1.2
2.1_ 2.9
Cr
0.15_ 0.35
0.05_ 0.25
0.05_ 0.25
0.30
0.04_ 0.35
0.18_ 0.28
Ni
_
_
_
_
_
_
Zn
0.10
0.25
0.25
0.20
0.25
5.1_ 6.1
Ti
_
0.15
0.15
0.15
0.15
0.20
Each (Others)
0.05
0.05
0.05
0.05
0.05
0.05
Total (Others)
0.15
0.10
0.10
0.15
0.15
0.15
Al
Remaining
Remaining
Remaining
Remaining
Remaining
Remaining
Single number indicates maximum content.
Packing of aluminum tread checkered plate Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.
Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet
Model NO.: 6061
Alloy: Alloy
Alloy No.: 6061
Tempers: T6
Thickness: 6 _ 300mm
Length: 1000 _ 10000mm
Width: 500 _ 2700mm
Trademark: Signi aluminum
Transport Package: Wooden Pallet
Specification: China Standard
Origin: Henan, China
HS Code: 76061190
Bright Finish 6061 Aluminum Tread Checkered Plate/Sheet