Single
layer roof Roll Forming Machine
Single Layer Roof Roll Forming Machine is
composed of feeding, molding and shaping up after cutting machines, color plate
and its appearance tidy and beautiful, uniform lacquer veins, high strength,
durable, widely used in industrial and civil buildings, such as factories,
warehouses, stadiums, exhibition halls, theaters room and wall surface.
Components
of single layer roof roll forming machine:
Manual Uncoiler , Guiding Platform, Main Machine Of
Roll Forming,Cutting Device, Hydraulic Station, PLC Control, Supporter Table.
The processing technique
and deployment of single layer roof roll forming machine:
Man-made uncoiler-Roll forming machine-PLC system-Hydraulic system-Post cut
Description
of single layer roof roll forming machine:
Thickness
of material: 0.2-0.8mm
Main
structure:300H
steel
Wall
plate: 14mm
Diameter
of shaft: Ф70 solid
Chain:
P=19.05
Bear:
6210
Electric
motor power: 3KW
Reducer:
4# cycloid reducer
Roller:
11rows
Forming
speed: 8-12m/min
Material
of Rollers: Carbon Structural Steel Hard chromium Plating on the surface
Cutting
type: Hydraulic shearing
Motor:
380V, 50HZ/3 phase
Electrical
part:CHINT,Delixi
Hydraulic
motor: 3KW
Tail
cutting material: Delta PLC-14ES
Size
of machine: 5.8m*1.4m*1.2m
Delivery: 30
days after receipt of advance payment
Package:
Plastic packing and nude in the container
Payment
Term: T/T, L/C, Trade assurance
Warranty: 12 months limited warranty
FAQ:
1. Q:
Are you a manufacturer?
A:Yes,
we are manufacture with roll forming machine factory.
2. Q: What
details of the machine you should get from me.
A: I will
confirm all details with you, such as the voltage in your city.
3. Can you
use other brand of spare parts for me if i want?
A: No
problem if you want to pay the money.
Single Layer Roof Roll Forming Machine Single Layer Roof Roll Forming Machine,Single Layer Roofing Sheet Machine,Galvanized Roof Roll Forming Machine,Steel Single Layer Roof Roll Forming Machine Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , http://www.zmsteels.com
He also pointed out that in the next two decades, world oil demand will mainly come from non-OECD countries, Asia will account for 70%, and another 50% will come from China. Seventy-five percent of the world's oil supply will come from the Middle East. OPEC countries will increase their discourse power in the oil market. At the same time, the rate of unconventional oil and gas development in traditional oil production areas outside the OPEC countries will accelerate.
Dr. Ruhr believes that if there are no major technological breakthroughs, electric vehicles will develop slowly until 2030, and in view of possible conflicts with food production, bio-oil production It will not be sustainable after 2030.
"The use of natural gas will be more than thought." He pointed out that liquefied natural gas (LNG) and unconventional natural gas will be the two major directions of natural gas development in the future. At present, the total energy consumption of natural gas** countries is only about 5%, so its development in China will be very fast. "On the one hand, it depends on the import of LNG. On the other hand, it will be derived from the development of domestic shale gas in China," he said.
BP expects energy shortages in the next 20 years
"With the continuous improvement of energy efficiency, human beings have the ability to support faster economic development with less energy. It is expected that there will be no shortage of energy in the world in the next 20 years." Christopher Group Chief Economist Christopher Ruhr told the China Securities Journal reporter.